lsusb
2. Ketik Perintah;
sudo modprobe usbserial vendor=0x05c6 product=0x6500
Kemudian tunggu sekitar 30 detik untuk prosesnya.
3. sudo wvdialconf
Scanning your serial ports for a modem.
Modem Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 — OK
ttyUSB0: ATQ0 V1 E1 Z — OK
ttyUSB0: ATQ0 V1 E1 S0=0 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB0: Modem Identifier: ATI — Manufacturer:QUALCOMM INCORPORATED
ttyUSB0: Speed 9600: AT — OK
ttyUSB0: Max speed is 9600; that should be safe.
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 — ERROR
ttyUSB2: failed with 2400 baud, next try: 9600 baud
ttyUSB2: ATQ0 V1 E1 — ERROR
ttyUSB2: failed with 9600 baud, next try: 9600 baud
ttyUSB2: ATQ0 V1 E1 — ERROR
ttyUSB2: and failed too at 115200, giving up.
Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″
3. sudo wvdialconf
Scanning your serial ports for a modem.
Modem Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 — OK
ttyUSB0: ATQ0 V1 E1 Z — OK
ttyUSB0: ATQ0 V1 E1 S0=0 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB0: Modem Identifier: ATI — Manufacturer:QUALCOMM INCORPORATED
ttyUSB0: Speed 9600: AT — OK
ttyUSB0: Max speed is 9600; that should be safe.
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 — ERROR
ttyUSB2: failed with 2400 baud, next try: 9600 baud
ttyUSB2: ATQ0 V1 E1 — ERROR
ttyUSB2: failed with 9600 baud, next try: 9600 baud
ttyUSB2: ATQ0 V1 E1 — ERROR
ttyUSB2: and failed too at 115200, giving up.
Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″
4. edit parameter wvdial.conf dengan mengetikkan
sudo gedit /etc/wvdial.conf
5. Isikan sebagai berikut (sesuaikan dengan operator yang anda pakai)
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CRM=1
Modem Type = Analog Modem
Baud = 230400
Modem = /dev/ttyUSB0
ISDN = 0
Dial Command = ATDT
Phone = #777
Username = isi dengan username operator anda
Password =isi dengan password operator anda
PPPD Path = /usr/sbin/pppd
New PPPD = yes
Stupid Mode = yes
5. Langkah terakhir yaitu ketik;
sudo wvdial
MEMBUAT PERINTAH OTOMATIS EJECT MODEM CDMA
trik agar cdma modem otomatis eject atau langsung terdeteksi di ubuntu
buat sebuah file baru di /etc/udev/rules.d/99-evdo-modem.rules
dengan cara ketik di terminal :
sudo gedit /etc/udev/rules.d/99-evdo-modem.rules
dan isikan ketikan di bawah ini:
SYSFS{idVendor}==”6000″, SYSFS{idProduct}==”1000″, RUN+=”/usr/bin/eject %k”
lalu ketik di terminal :
sudo modprobe usbserial vendor=0×6500 product=0×1000
(vendor dan product bisa di lihat dari output perintah lsusb )
sekarang kita sudah bisa koneksi internet di ubuntu dengan modem cdma
Sumber:
http://omjosbck.blogspot.com/2011/03/koneksi-modem-venus-vt-80-e-di-ubuntu.html
http://abiahmad.wordpress.com/2011/04/27/koneksi-modem-cdma-venus-vt-80n-di-ubuntu/
